Skip to main content

Print start temperature instability waiting time too long

  • This macro can be directly placed in the configuration.
  • The purpose of this macro is to normally wait for the temperature to rise, but once the temperature reaches the target, it proceeds to the next step immediately.
printer.cfg
[gcode_macro M109]
rename_existing: M109.1
gcode:
{% set s = params.S|float %}
M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %} ; Set hotend temp
{% if s != 0 %}
TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1} ; Wait for hotend temp (within 1 degree)
{% endif %}