打印开始温度不稳定等待时间太久

• 此宏直接放配置里面即可
• 此宏作用是正常等待上升温度，但是温度到达目标后直接进行下一步

printer.cfg

[gcode_macro M109]
rename_existing: M109.1
gcode:
    {% set s = params.S|float %}
    M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}  # Set hotend temp
    {% if s != 0 %}
    TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}   # Wait for hotend temp (within 1 degree)
    {% endif %}	

[gcode_macro M190] # Wait Bed Temp
rename_existing: M190.1
gcode:
    {% set s = params.S|float %}
    M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}   # Set bed temp
    {% if s != 0 %}
        TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s-2} MAXIMUM={s+5}  # Wait for bed temp (within n degrees)
    {% endif %}