📄️ Introduction
Product Overview
🗃️ SHT36 V2 Firmware Compilation and Flashing
4 items
📄️ Tool Board ID Reading and Viewing
* Before searching for the ID, connect the tool board to the UTOC or a mainboard with bridge firmware using an XT30 data cable. Below is a reference wiring diagram:
📄️ Wiring Reference
The included blue heatsink should be attached to the 2209 driver!!!
📄️ 配置参考
请不要打开网页翻译时候修改配置
📄️ Accelerometer Usage
Usage Tutorial
📄️ 3D Models and Schematics
* This document provides the following resources: