📄️ Introduction
* We are excited to release the brand-new FLY-Pi V2 host computer. This board has the same installation dimensions as the Raspberry Pi and can replace the Raspberry Pi as a host computer. It features 1GB of onboard DDR3 memory.
🗃️ System Image Burning
2 items
📄️ SSH Connecting to Host
* This document applies only to FLY host computers
📄️ Connect to WIFI
- The steps and methods for connecting to WiFi in the FLYOS-FAST system and the FLYOS-Armbian system are slightly different. Please select the tutorial corresponding to the system you have flashed!
📄️ Host Computer Power Supply
There are two power supply methods for FLY-Pi-V2.
📄️ Screen Wiring and Configuration
Screen Wiring
📄️ Accelerometer usage
Mainboard wiring
📄️ Other Settings for Host Computer
## FLYOS-FAST System - Other Configurations
📄️ Onboard 5V Fan Port
Onboard 5V Fan Wiring
📄️ Power-off Shutdown and Power-loss Resumption
* Fly_FAST system is required; other systems are not supported!
📄️ I2C Usage
* Use the I2C interface on pin 40 of the host computer
📄️ Onboard UTOC Usage
Turn on the DIP switch
📄️ Onboard 40PIN Header Diagram
📄️ 3D Model and Schematic
* This document provides the following