FLY-MINI Pad | FLY Docs

📄️ Introduction

Fly-MINI-Pad is an entry-level host for Klipper.

Host User Guide for Beginners

* You can connect to the device using serial port or WIFI.

Install the antenna on the MINI PAD

* FLY-TOOLS needs to be connected to the network on the host machine and then access it by entering IP+:9999 in the host machine.

* Mini Pad can directly connect to the accelerometer via the onboard interface or use a tool board with a built-in accelerometer.

There are three power supply methods for FLY-MINI Pad.

It is not recommended to use two UTOICs; flashing and connecting will be very troublesome.

Please note that after using this method, you will not be able to use the accelerometer interface on mini pad to connect an external accelerometer.

* This document provides the following: