📄️ Introduction
Product Features
📄️ System Burning
Beginner's Operation Guide for Host Computer
📄️ Connect WIFI
Install the Antenna on Gemini
📄️ SSH Connect to Host Computer
* You can connect to the device via serial port or WIFI
🗃️ Gemini V3 firmware compilation and flashing
6 items
📄️ klipper参考配置
📄️ Main Board Wiring
Interface Diagram
📄️ CAN Bridge
The CAN bus is a serial communication protocol bus used for real-time applications. It can use twisted-pair cables to transmit signals and is one of the most widely applied field buses in the world. The CAN protocol is used for communication between various components in automobiles, replacing expensive and cumbersome wiring harnesses. The robustness of the protocol has extended its use to other automation and industrial applications. The characteristics of the CAN protocol include integrity serial data communication, real-time support, a transmission rate of up to 1Mb/s, 11-bit addressing, and error detection capability.
📄️ Screen Wiring and Configuration
* FLY-TOOLS requires the host computer to be connected to the internet and then access it by entering the host's IP+:9999
📄️ External Drive Usage Tutorial
📄️ Main Control Fan
Gemini has an onboard 5V controllable interface for main control cooling, and the wiring method is shown in the following figure
📄️ 3D Model and Schematic
* This document provides the following: