Product Introduction
Product Overview
Quick start guide and important notes
🎯 Guide Objectives:Within 30 minutes, complete the system deployment and firmware flashing of the Fly-Gemini motherboard, bringing it to a state where it can connect to Klipper and perform basic tests.
FAST System Documentation Center
We have organized the following documentation based on your usage scenarios to help you quickly find what you need.
System Introduction
Overview
System Image Flashing
System Configuration Guide
* This guide will walk you through the basic configuration of the FlyOS-Fast system, helping you get started quickly and optimize your experience.
SSH Connection to Host Computer
* This document applies only to FLY host computers
Connect to WiFi
Screen wiring and configuration
Screen Wiring
Pinout
- This page lists the pinout of the FLY-Gemini V3 mainboard after flashing Klipper firmware, with pin numbers based on the mainboard schematic.
Mainboard Wiring
Before starting, fully shut down the printer and disconnect the power supply. Do not plug or unplug cables, organize wiring harnesses, or touch terminals while the power is on.
Gemini-V3 Lower Firmware Flashing and ID Query
4 items
Klipper参考配置
External Drive Usage Tutorial
Motherboard Precautions
Troubleshooting
Accelerometer Usage
Mainboard Wiring
Camera Connection and Usage
Please strictly follow the order below; otherwise, the camera may not be recognized:
Onboard 5V Fan Port
Onboard 5V Fan Wiring
Connect Toolboard and Search ID
This tutorial specifically covers the toolboard* wiring and ID searching. The steps described do not apply to the mainboard; please pay attention to the distinction.
3D Model and Schematic
* This document provides the following