Firmware flashing and onboard DIP switch instructions
Select Firmware Type
Firmware Compilation and Burning
Please first select the firmware type you intend to burn. The corresponding compilation and burning steps will only be displayed after a selection is made.
Read and View Motherboard ID
- This tutorial applies only to reading and viewing the ID of the FLY-C8 motherboard.
Connect to the toolboard and search for ID
This tutorial specifically covers the wiring and ID search for the toolboard*. The steps are not applicable to the motherboard, so please make sure to distinguish between them.
Bootloader recovery (unbrick)
- Please note that bootloader is already flashed at the factory; no need to flash it again