Firmware flashing and onboard DIP switch instructions
Select Firmware Type
Firmware Compilation and Flashing
Please first select the actual firmware type to be flashed. Only after selection will the corresponding compilation and flashing steps be displayed.
Read and View Motherboard ID
- This tutorial applies only to reading and viewing the ID of the FLY-C8 motherboard.
Connect to the toolboard and search for ID
This tutorial specifically covers the wiring and ID search for the toolboard*. The steps are not applicable to the motherboard, so please make sure to distinguish between them.
Bootloader recovery (unbrick)
- Please note that bootloader is already flashed at the factory; no need to flash it again