📄️ Introduction
The ALPS pressure module is a pressure sensing solution designed based on the ADS131M02, specifically developed for automatic Z-axis homing and mesh bed leveling of 3D printers. With high-sensitivity pressure detection and real-time signal processing, the module can accurately sense the contact status between the print head and the bed, achieving millimeter-level leveling accuracy. It eliminates errors caused by traditional mechanical limit switches and significantly improves the success rate of the first layer printing.
📄️ How to Adjust Module Trigger Value
Video Tutorial
📄️ Klipper Configuration
Example Configuration File
📄️ Marlin Configuration
* This document provides the following
📄️ RRF Configuration
* This document provides the following
📄️ 3D Model
* This document provides the following
📄️ Firmware Update
Download Firmware
📄️ FAQ
1. Sensor light remains on/flashes after sending the SET_PIN PIN=_probe_ready VALUE=0 command?