Pinout
Note
- This page lists the pinout of the FLY-USB-LIS2DW tool board after flashing Klipper firmware. The pin numbers are subject to the product schematic.
Accelerometer (SPI)
The accelerometer uses software SPI, requiring three signal pins to be specified separately:
| Signal | Pin |
|---|---|
| CS | gpio9 |
| MOSI | gpio11 |
| MISO | gpio12 |
| SCLK | gpio10 |
PWM
| PWM | Pin |
|---|---|
| PWM1 | TODO |
Loading...