DSI-LCD5
Product Introduction
- Screen Size: 120.7mm*76.0mm
- Display Area: 108mm*66.2mm
- Resolution: 800*480
- Screen Type: IPS
- Communication Method: DSI/Mipi
- On-board Interface: 15 pin DSI / 22pin Mipi
- Working Temperature Range: 0°-60°C
- Touch Type: Capacitive (Capacitive)
- Logic Voltage: 3.3V
- Weight: 135.5g
Raspberry Pi System
- Pre-built system images are available for the screen display and touch testing.
- Note: Screen configuration is required. System Image
On-board Buttons
Installation on Raspberry Pi
Configuration on Raspberry Pi
Note
- It is recommended to use the
bookwormversion of the Raspberry Pi system.
- Raspberry Pi 4B/3B Using DSI Interface
- Raspberry Pi 5B Using Mipi Interface
DSI Usage
- After the image writing is completed, enter /boot/config.txt and add the following command
dtoverlay=vc4-kms-dsi-7inch
- Save and exit
- Reference Wiring
Important Notice
- The DSI and CSI interfaces on the Raspberry Pi 5 are now called MIPI.
- The MIPI interface can be configured to directly use a CSI camera or DSI screen.
- Please pay attention to the direction of the header pins.
-
The Raspberry Pi 5 now has two MIPI interfaces. When viewed from the front, there are markings 1 and 0.
-
Wiring for DSI Screen
- If using the 1st interface, configure the screen as follows:
dtoverlay=vc4-kms-dsi-7inch,dsi1- If using the 0th interface, configure the screen as follows:
dtoverlay=vc4-kms-dsi-7inch,dsi0- Reference Wiring
Download 3D Model
https://cdn.mellow.klipper.cn/STEP/FLY-DSI-LCD5.step