DSI-LCD5

Product Introduction

• Screen Size: 120.7mm*76.0mm
• Display Area: 108mm*66.2mm
• Resolution: 800*480
• Screen Type: IPS
• Communication Method: DSI/Mipi
• Onboard Interface: 15 pin DSI / 22pin Mipi
• Operating Stability: 0°-60°C
• Touch Type: Capacitive
• Logic Voltage: 3.3V
• Weight: 135.5g

Raspberry Pi System

• There are pre-packaged system images here, which have been tested for DSI screen display and touch
• Note: Screen configuration is required System Image

Onboard Button

Raspberry Pi Installation

Raspberry Pi Configuration

Precautions

• It is recommended to use the bookworm version of the Raspberry Pi system

Using DSI Interface with Raspberry Pi 4B/3B

DSI Usage

• After the image writing is completed, enter /boot/config.txt and add the following command

dtoverlay=vc4-kms-dsi-7inch

• Save and exit

• Reference Wiring
  

Using Mipi Interface with Raspberry Pi 5B

Notice

• The DSI and CSI interfaces on the Raspberry Pi 5 have now been renamed to MIPI
• The MIPI interface can be directly configured to use either a CSI camera or a DSI screen
• Please pay attention to the orientation of the gold fingers

• The Raspberry Pi 5 now has two MIPI interfaces, which are labeled 1 and 0 when viewed from the front

• DSI Screen Connection

  • If using interface 1, configure the screen as follows:

  dtoverlay=vc4-kms-dsi-7inch,dsi1
  • If using interface 0, configure the screen as follows:

  dtoverlay=vc4-kms-dsi-7inch,dsi0
  • Reference Wiring
    

3D Model Download

https://cdn.mellow.klipper.cn/STEP/FLY-DSI-LCD5.step