Screen Wiring and Configuration

info

• FLY-TOOLS needs to be connected to the network and access the upper computer through IP+:9999
• For example, 192.168.6.110:9999

TFT Wiring

• The screen must be configured in FLY TOOLS and KS opened
  
• FLY-Pi TFT screen wiring
  
  
  

HDMI Wiring

• The screen must be configured in FLY TOOLS and KS opened
  
• Use an FPC to HDMI module
• Please note that a type-C with data transmission capability must be connected to the module
  

TFT Screen Configuration

TFT Screen

• KS must be opened in FLY TOOLS
  

TFT Capacitive Screen Configuration

Method One

• Capacitive configuration requires using the following command to configure as fly-tft-v2-c

sudo sed '11s/screen=none/screen=fly-tft-v2-c/' -i /boot/FlyOS-Env.txt

• Please confirm that the DIP switch on the back of the screen is set to Cap
• Use the following command to check if the modification was successful

sed -n '9,11p' /boot/FlyOS-Env.txt | grep -v '^#'

• To modify a resistive screen to a capacitive screen, use the following command

sudo sed -i '11{/^#/!s/screen=fly-tft-v2-c/screen=fly-tft-v2-r/}' /boot/FlyOS-Env.txt

TFT Resistive Screen Configuration

Method One

• Resistive screen configuration requires using the following command to configure as fly-tft-v2-r

sudo sed '11s/screen=none/screen=fly-tft-v2-r/' -i /boot/FlyOS-Env.txt

• Please confirm that the DIP switch on the back of the screen is set to Resi
• Use the following command to check if the modification was successful

sed -n '9,11p' /boot/FlyOS-Env.txt | grep -v '^#'

• To modify a capacitive screen to a resistive screen, use the following command

sudo sed -i '11{/^#/!s/screen=fly-tft-v2-r/screen=fly-tft-v2-c/}' /boot/FlyOS-Env.txt

---