Skip to main content

Screen Connection

Important Safety Notice
  • When using FPC cables to connect TFT or HDMI screens, ensure the device is completely powered off to prevent screen damage
  • When connecting TFT screens, carefully check the insertion direction of the FPC cable to avoid reverse connection causing device failure

TFT Resistive Screen Connection​

Tip
  • The TFT screen package includes two FPC cables: 14P (narrow cable) and 16P (wide cable)
  • For resistive screens, please use the 14P (narrow cable)
  • TFT-V2 Resistive Screen Connection
Loading...
  • TFT-V1 Resistive Screen Connection
Loading...

Screen Configuration​

FLYOS-FAST System Screen Configuration​

  1. Access the device IP address via browser, e.g., http://192.168.6.110/

Fluidd Interface: Uncheck "Filter hidden files and folders"

Loading...

Mainsail Interface: Check "Show hidden files"

Loading...
  1. Enter the displayed .flyos-config folder and find the sys-config.conf configuration file
Loading...
  1. Edit the sys-config.conf file and modify the corresponding configuration items based on the screen type
  • Change screen= to fly-tft-v1
  • Change klipper_screen=0 to klipper_screen=1
  • Below is a reference after modification
screen=fly-tft-v1
  • Also modify
klipper_screen=1
Loading...
Configuration Notes
  • Ensure the DIP switch on the back of the screen is set correctly: Set to Resi for resistive screens
  • The configuration file format must be key=value, with no spaces after the equals sign
  • Do not modify the configuration file format arbitrarily, otherwise the configuration will not take effect
  1. After saving the configuration
Important Note

After modifying the configuration, please restart the system for the changes to take effect

Loading...