Skip to main content

System Flashing

Host User Guide for Beginners​

Host User Guide for Beginners

Preparations Before System Flashing​

  • Card Reader
  • One TF card with a capacity of no less than 16GB or no more than 128GB, and the transmission speed of the TF card must be Class10 or higher
  • Download the corresponding System Image
  • Download the required Burning Tool

System Flashing​

info
  • Lite 2.1 can only flash the system to the TF card and cannot use M2WE
  • After the system flashing is completed, the TF card needs to be installed on Lite 2.1

System Image Writing to TF Card

Preparation​

  • First, install the software Win32DiskImager
  • Extract the system; the file name after extraction should end with .img
  • Insert the TF card into a card reader and plug the card reader into a USB port on your computer
  • If the TF card has data, please back it up. After writing the system, it is not recommended to remove the system card unless you need to write it to an M2WE and then can remove the TF card

Formatting the Memory Card​

  • Use the TFFormatter.exe software to format the TF card
  • Select the disk you want to format
  • Alternatively, use the built-in disk management in Windows to delete the partition. After deleting the partition, create a new partition.

Writing to the TF Card​

Test

  • Red selects the file to be burned
  • Orange selects the TF card to be burned
  • Blue will burn the system into the TF card
  • Confirm burning and wait for the burning to complete
  • Burning completed

System Configuration​

FLYOS_Env Usage

Tip
  • Starting from system version 3.3.4, you can directly use FLY-TOOLS for system configuration without entering the boot to modify configurations.
  • Please note that older systems do not support direct configuration using FLY-TOOLS.
  • FLY_TOOLS Usage Guide

WIFI Configuration Instructions​

Notice
  • The WIFI configuration method is complex and requires connecting to an upper-level machine via a serial port and then proceeding with the WIFI connection.

Installing the TF Card onto LITE 2.1​

  • After flashing the system onto the TF card, you need to connect the TF card to this location on LITE 2.1, otherwise the system will not boot