Super8

Product Parameters

32-bit ARM Cortex-M4 series 168 MHz, STM32F407ZGT6 chip
Firmware: Marlin 2.0 / Reprap / Klipper
Driver support: A4988, LV8729, DRV8225, TMC2208/2209/5160, etc.
Driver mode support: TMC: UART/SPI
8 high-voltage driver positions, support for 8 independent motor drivers, 5 extruders, 10 PWM fans
Display: Serial touch screen, mini12864 LCD, 12864 LCD, 2004 LCD, FLY 4.3/7.0 V1
1 high-voltage IN port, supports automatic bed leveling sensors: BLTouch, PL08N proximity sensors, Klicky, Voron Tap, etc.
Optional limit switch power: 5V/12V/24V
Using repap firmware, can use onboard ESP32 WiFi module, supports 1.6m/s
Unique PWM Fan MOS board design, damage can be directly replaced, reducing customer repair difficulty; two 2-pin fan interfaces can support 4-pin PWM fans
PCB uses 2OZ copper thickness, capable of supporting larger currents
6 ADC interfaces, supports up to six thermistors
8 IO interfaces, can be used for leveling and limit switches
5 heater cartridge interfaces, supports up to five heater cartridges
2 PWM interfaces