tip

• Super8 PRO defaults to using an SD card for firmware burning.
• Please prepare a SD card with a capacity not exceeding 32G.
• Counterfeit memory cards may lead to burning failure, please try to use the recommended memory cards below for firmware updates.
• The transmission speed of the SD card should be at least class10, it is recommended to use SD cards from brands like SanDisk.

Firmware Burning Instructions

tip

• Super8 Pro comes with a pre-burned bootloader on the SD card, no need to burn it again.

How to Determine Which Firmware You Need

tip

• Note that you only need to burn one type of firmware.

• Super8 PRO can connect to the host machine in the following ways
• USB Firmware
  • Pros: Reliable and stable communication.
  • Cons: May affect data transmission if multiple USB devices are connected.
• USB Bridge Firmware
  • Pros: Can connect multiple devices without occupying USB ports.
  • Cons: May cause errors such as homing timeout when used together with KlipperScreen.