Super8

Product Specifications
- 32-bit ARM Cortex-M4 series 168 MHz, STM32F407ZGT6 chip
- Firmware: Marlin 2.0/Reprap/Klipper
- Driver support: A4988, LV8729, DRV8225, TMC2208/2209/5160, etc.
- Driver mode support: TMC: UART/SPI
- 8 high-voltage driver bits, support for 8 independent motor drivers, 5 extruders, 10 PWM fans
- Display: Serial touchscreen, mini12864 LCD, 12864 LCD, 2004 LCD, FLY 4.3/7.0 V1
- 1 high-voltage IN port, supports auto-bed leveling sensors: BLTouch, PL08N and other proximity sensors, Klicky, Voron Tap, etc.
- Optional limit switch power supply: 5V/12V/24V
- Using Repap firmware, the onboard ESP32 WiFi module can be used, supports up to 1.6m/s
- Unique PWM Fan MOS board design, damaged parts can be directly replaced, reducing customer repair difficulty, two 2-pin fan interfaces can support 4-pin PWM fans
- PCB uses 2OZ copper thickness, capable of supporting higher current
- 6 ADC interfaces, supports up to six thermistors
- 8 IO interfaces, can be used for leveling and limit switches
- 5 heating cartridge interfaces, supports up to five heating cartridges
- 2 PWM interfaces
Notes
Output Port | Maximum Current with 24V Power | Maximum Current with 12V Power |
---|---|---|
Bed Port | 15A | 7.5A |
Heater Port | 6A | 3A |
Fan Port | 1A | 0.5A |
Loading...