tip

• The Super5 Pro defaults to using an TF card for firmware burning.
• Please prepare a TF card with a capacity of no more than 32G.
• Counterfeit memory cards may cause the burning to fail, so it is recommended to use the memory cards recommended below for updating the firmware.
• The transmission speed of the TF card should be Class10 or above, it is suggested to use TF cards from brands such as SanDisk.

Firmware Burning Instructions

tip

• The Super5 Pro has already pre-flashed the TF card bootloader at the factory, so there is no need to re-flash it.

How to Determine Which Firmware You Need

tip

• Note that you only need to flash one of the firmwares.

• The Super5 Pro can connect to the host machine in the following ways
• USB Firmware
  • Advantage: Reliable and stable communication.
  • Disadvantage: Data transmission may be affected if multiple USB devices are present.
• USB Bridge Firmware
  • Advantage: Can connect multiple devices without occupying USB ports.
  • Disadvantage: May cause errors such as homing timeout when used with KlipperScreen.