tip

• Super5 Pro defaults to using an SD card for firmware burning
• Please prepare an SD card with a capacity no more than 32G
• Counterfeit memory cards may lead to burning failure; please try to use the recommended memory cards below for firmware updates
• The SD card's transfer speed should be at least class10, it is recommended to use SD cards from brands like SanDisk

Firmware Burning Instructions

tip

• Super5 Pro comes pre-flashed with an SD card bootloader, you do not need to flash it again

How to Determine Which Firmware You Need

tip

• Note that you only need to flash one of the firmwares

• Super5 Pro can connect to the host machine in the following ways
• USB Firmware
  • Pros: Reliable and stable communication
  • Cons: May affect data transmission if multiple USB devices are present
• USB Bridge Firmware
  • Pros: Can connect multiple devices without occupying USB ports
  • Cons: May cause errors such as homing timeouts when used with KlipperScreen