Skip to main content

Mainboard Precautions

Power Indicator​

  • When using Type-C power supply without connecting other motherboard power, it should light up SYS_5V and SYS_3.3V.
  • After connecting the motherboard power HVIN, VIN, BOARO, POWER, the motherboard power light should remain on.

Driver​

  • TP5160 and TP2209 are just different names and do not require jumpers to select drive mode.
  • The driver port can only install TP drivers and cannot install other devices.

Limit Port​

  • ProX10 supports 5V and 12V power selection. Please note that if you use proximity switches, a diode needs to be installed for voltage drop.

Host Computer​

  • ProX10 supports using an external host computer. By setting the DIP switch to connect Type-C, it can be used.

Firmware Burning​

  • The motherboard supports burning using an TF card, but the factory default is Katapult.
  • If you need to burn using an TF card, you need to re-burn the BL.