Power Indicator
- When using Type-C power supply without connecting other motherboard power, it should light up
SYS_5V
and SYS_3.3V
.
- After connecting the motherboard power
HVIN
, VIN
, BOARO
, POWER
, the motherboard power light should remain on.
Driver
- TP5160 and TP2209 are just different names and do not require jumpers to select drive mode.
- The driver port can only install TP drivers and cannot install other devices.
Limit Port
- ProX10 supports 5V and 12V power selection. Please note that if you use proximity switches, a diode needs to be installed for voltage drop.
Host Computer
- ProX10 supports using an external host computer. By setting the DIP switch to connect Type-C, it can be used.
Firmware Burning
- The motherboard supports burning using an TF card, but the factory default is
Katapult
.
- If you need to burn using an TF card, you need to re-burn the BL.