Skip to main content

Screen Wiring and Configuration

Screen Wiring​

Important Safety Notice
  • When connecting a TFT or HDMI screen using an FPC cable, ensure the device is completely powered off to prevent screen damage.
  • When wiring the TFT screen, carefully confirm the insertion direction of the FPC cable to avoid device malfunction caused by reverse connection.

TFT Resistive Screen Cable Wiring​

tip
  • Please pay attention to the cable pinout sequence to ensure correct connection.
  1. TFT Screen Installation Diagram
  • Pinout Reference
Loading...
  • Connection Method
Loading...

Screen Configuration​

FLYOS-FAST System Screen Configuration​

  1. Access the device IP address via a browser, e.g., http://192.168.6.110/

fluidd interface operation: Uncheck "Filter hidden files and folders"

Loading...

mainsail interface operation: Check "Show hidden files"

Loading...
  1. Enter the displayed .flyos-config folder and locate the sys-config.conf configuration file.
Loading...
  1. Edit the sys-config.conf file and modify the corresponding configuration items based on the screen type.
  • Change the text after screen= to fly-tft-v1
  • Change klipper_screen=0 to klipper_screen=1
  • Below is a reference after modification:
screen=fly-tft-v1
  • Also need to modify:
klipper_screen=1
Loading...
Configuration Notes
  • Confirm the DIP switch on the back of the screen is correctly set: Resistive screen should be set to Resi.
  • The configuration file format must be key=value, with no spaces after the equals sign.
  • Do not modify the configuration file format arbitrarily, otherwise the configuration will not take effect.
  1. After saving the configuration, restart the system for the changes to take effect.
Loading...