DIP Switch Introduction

tip

FLY Gemini connects to the host computer through DIP switches. If the DIP switches are not set correctly, it cannot be used normally.

Notice

Please note that the DIP switches need to be set to the specified positions to connect to the host computer normally.

Connecting to the Onboard Host Computer

• Set DIP switches 1 and 2 to the right to connect the lower computer to the host computer via the built-in USB.
• Set DIP switches 3 and 4 to the left; otherwise, it will affect the connection between the lower computer and the host computer.
  
• After setting the DIP switches in this way, the USB port below will be occupied by the lower computer. Please do not connect other devices.
  

Connecting to an External Host Computer

• Set DIP switches 3 and 4 to the right to connect the lower computer to the external host computer via the built-in USB.
• Set DIP switches 1 and 2 to the left; otherwise, it will affect the connection between the lower computer and the external host computer.