DIP Switch Introduction

tip

FLY Gemini connects to the host machine via DIP switches; if the positions are incorrect, it will not function properly.

Note

Please ensure that the DIP switch is set to the specified position to connect properly to the host machine.

Connecting to Onboard Host Machine

• Set DIP switches 1, 2 to the right to connect the lower-level device to the host machine via the built-in USB.
• Set DIP switches 3, 4 to the left, otherwise it will affect the connection between the lower-level device and the host machine.
  
• After setting the DIP switches as described above, the lower-level device will occupy the USB port below. Please do not connect other devices.
  

Connecting to External Host Machine

• Set DIP switches 3, 4 to the right to connect the lower-level device to the host machine via the built-in USB.
• Set DIP switches 1, 2 to the left, otherwise it will affect the connection between the lower-level device and the host machine.