DIP Switch Introduction

tip

FLY Gemini connects to the host machine via the DIP switch. If the position of the DIP switch is incorrect, it cannot be used normally.

Notice

Please note that the DIP switch needs to be set to the specified position to connect to the host machine properly.

Connecting to Onboard Host Machine

• Move DIP switches 1 and 2 to the right to connect the downstream device to the host machine via the built-in USB.
• Move DIP switches 3 and 4 to the left, otherwise it will affect the connection between the downstream device and the host machine.
  
• After moving the DIP switches as described above, the USB port below will be occupied by the downstream device. Do not connect other devices.
  

Connecting to External Host Machine

• Move DIP switches 3 and 4 to the right to connect the downstream device to the host machine via the built-in USB.
• Move DIP switches 1 and 2 to the left, otherwise it will affect the connection between the downstream device and the host machine.