FLY VoltUp Power

The FLY-VoltUp Power boost module is specifically designed for high-voltage driving. Users do not need to purchase an additional high-voltage power supply to achieve high-voltage driving, helping to save space when designing 3D printers.

Loading...

Product Features

• Output power 48V/60V selectable
• Onboard fan port, reserved mounting holes for 4010 fan (self-installation required), output voltage matches input voltage
• Dual power interface expansion: provides two power output interfaces, allowing users to use two power outputs simultaneously, and each power output can be individually set to 48V or 60V
• Easy installation: standard size design, suitable for various environments, no additional driver installation required.
• Compact size: the expansion board has a reasonable size, does not take up too much space, and is easy to integrate into various projects.

Product Specifications:

• Power input: 12V/24V
• Output interface: two selectable power outputs 48V/60V (selectable via jumper cap)
• Fan interface: two XH2.54 2P VCC FAN

Notes:

• Before installation, disconnect the power and turn off all devices.
• The output voltage of each channel can be independently adjusted. When the output voltage is set to 48V, the maximum current for that channel can be set to 2A; when set to 60V, the maximum current for that channel can be set to 1A.
• The output voltage of both VCC FAN interfaces matches the power input voltage.
• The module reserves mounting holes for a 4010 fan. Since the boost module generates significant heat, a fan must be installed for heat dissipation.
• Built-in reverse polarity protection circuit prevents damage to components caused by incorrect power polarity connection.
• Do not insert voltage selection jumper caps simultaneously to avoid damaging components.
• Ensure correct connection of positive and negative terminals to avoid component damage.

Loading...