install

Installation Guide

Installation to Voron Stealthburner

• Installing Halo to Stealthburner requires the use of our provided adapters
• First, download the two STL files we provided and print them yourself
  • Stealthburner_main_body(Adapt_to_Halo).stl(Click to download)
  • Halo_mounting_bracket.stl(Click to download)
  • Stealthburner_CW2_Assembly-2 v9.step(Click to download)

Antenna Installation

FPC Installation

• Install the FPC cable according to the above figure (the direction of the FPC cable should not be reversed, the blue side up)

Fixed Bracket Installation

Pass the FPC through the hole according to the above figure

Align the lower buckle first according to the figure above, and then press the upper part in. The figure 2 above shows the installed look

Install the adapter board and connecting cable

• The outlet position can be according to your habits, it does not have to be close to the back of the fan

Notes

• Explanation of outlet colors Black is negative pole GND, Red is positive pole VCC acceptable voltage is DC12-24V, White is GPIO47 can be used for material blocking detection, Yellow is GPIO48 can be used for shutdown after printing

Installation to Material Detection

• To be updated