Skip to main content

Connect to RRF

Important Note
  • AirClick must be connected to the same network as the target printer
  1. Click on System Settings on the left
  1. Select RRF for Printer Type

  2. Enter the IP address of the RRF machine in RepRapFirmware IP

  3. After configuring as shown above, click Submit in the bottom right corner to save the settings

  4. A prompt will appear at the top of the webpage if the connection is successful

  5. If the connection fails

    • Check if the IP address is correct
    • Check if the printer and AirClick are connected to the same network
    • Check if the RRF motherboard is functioning properly
    • Check if the browser can open the RRF webpage