Extruder Reference Related

• This document contains some extruder reference configurations
• For reference only, please adjust according to actual conditions when in use
• If there are errors, please feel free to submit a PR

Reference Configurations

Stealthburner-Clockwork2

rotation_distance: 21.84
gear_ratio:50:10
microsteps:16

Voron-Afterburner-Clockwork

rotation_distance: 21.84
gear_ratio:50:17
microsteps:16

Galileo2

rotation_distance: 47.088
gear_ratio: 9:1
microsteps: 16

BMG && BMG Wind

rotation_distance: 25.1200
gear_ratio:50:17
microsteps:16
full_steps_per_rotation: 200   

Nf sunrise

microsteps:16
rotation_distance: 4.46
max_extrude_only_distance: 120.0
max_extrude_only_velocity: 80.0
max_extrude_only_accel: 800.0

Orbiter 2 && Orbiter 2.5

microsteps: 32
full_steps_per_rotation: 200
rotation_distance: 4.637
nozzle_diameter: x.xx                              #define nozzle diameter
filament_diameter: 1.750
max_extrude_only_distance: 500
max_extrude_only_velocity: 120
pressure_advance: 0.025                         #to be calibrated
pressure_advance_smooth_time: 0.03     #to be calibrated

LDO Smart Orbiter 3.0

microsteps: 16
full_steps_per_rotation:200
rotation_distance:4.69
max_extrude_only_distance:500
max_extrude_only_velocity:120
pressure_advance:0.015
pressure_advance_smooth_time:0.03
max_extrude_cross_section:10

Hextrudort Low && Hextrudort Low PLUS

• Standard version (with smaller gears)

  rotation_distance: 22 #Tune it with a 200mm extrusion test
  #gear_ratio: 50:10 #for standard 10t motor
  gear_ratio: 50:8 #for standard 8t motor
  pressure_advance: 0.025 #between 0.015 to 0.035 depending on your hotend. Tuning necessary
  pressure_advance_smooth_time: 0.03

• PLUS version (with Bigger gears)

  rotation_distance: 35.8 #Tune it with a 200mm extrusion test
  #gear_ratio: 60:10 #for standard 10t motor
  gear_ratio: 60:8 #for standard 80t motor
  pressure_advance: 0.025 #between 0.015 to 0.05 depending on your hotend. Tuning necessary
  pressure_advance_smooth_time: 0.03

Sherpa MINI

gear_ratio: 5:1
microsteps: 16
rotation_distance: 22.388
max_extrude_only_distance: 100.0
max_extrude_cross_section: 50.0

MK8

microsteps: 16
rotation_distance: 34.406
max_extrude_only_distance: 100.0