Machine Adjustment Guide
Notes
- This document applies to printers that have completed basic assembly.
- Please follow the steps below in order for debugging.
- Some operations require power-off; please pay attention to safety.
Debugging Steps
| Step | Content | Description |
|---|---|---|
| Step 1 | Limit Switch Check | Verify limit switch wiring and trigger status to ensure hardware correctness before homing. |
| Step 2 | Homing and Direction Calibration | Motor wiring check, single-axis homing test, CoreXY direction calibration. |
| Step 3 | Heating and Temperature Calibration | Check heating function, PID temperature calibration, heating anomaly troubleshooting. |
| Step 4 | Machine Calibration | Extruder rotation_distance calibration, Z offset calibration. |
| Step 5 | Macro Configuration | Start macro, end macro configuration, slicer software settings. |
| Step 6 | Configuration Modification Instructions | Common configuration format errors and troubleshooting methods. |
Extended Functions
| Content | Description |
|---|---|
| Unlimited Position Usage | Suitable for machines without physical limit switches, using driver unlimited position function. |
Loading...