Skip to main content

FAST System Image Burning

Pre-System Flashing Preparation​

  1. Prepare the required equipment
  • Card reader
  • One TF card, capacity 16GB-128GB, transfer speed class 10 or above.
  • It is recommended to use TF cards from reputable brands such as SanDisk, Samsung, Kioxia. Do not use unbranded TF cards!
  • Windows computer (WIN7, WIN10, WIN11 are all compatible)

  1. Download the flashing tool Config Myprint

    • Click the download link below
    • Loading...

  2. Install the Find Myprints tool using the link below

Open the Flashing Tool Config Myprint​

1. Enter the system configuration interface​

After launching the software, select the System Configuration option from the left menu bar to enter the system flashing interface.

Loading...

2. Connect the storage device​

Connect the storage card to be flashed to the computer's USB port via a card reader.

💡 Recommendation: Using a USB 3.0 or higher interface can significantly improve flashing speed

3. Recognize the storage device​

Click the Refresh button next to Storage Device to ensure the system correctly identifies the connected storage card.

Loading...

4. Select the device model​

Click Device Selection, and choose the corresponding configuration scheme based on the device model you are using.

Loading...

5. Execute the flashing operation​

After confirming the device selection is correct, click the Start Flashing button.

Important Warning
  • This operation will permanently erase all data on the storage card!
  • Ensure you have backed up important files before flashing
  • Do not disconnect the device during the flashing process
Loading...

6. Complete the flashing​

Wait for the flashing progress to finish. When the interface displays a "Complete" prompt, it indicates the system image has been successfully written.

Loading...

System Startup Precautions​

System Startup
  • To ensure stable operation of the device, always use a power adapter of at least 5V 2A during the first startup and subsequent use
  • Some computer USB ports may not meet this standard
Loading...