Introduction
FLY SHT36/42 is a nozzle toolboard designed by Guangzhou Magnon Electronics Technology Co., Ltd. for 3D printer extruders. Using this toolboard, four wires can replace the complex wiring between the original motherboard and the print head, optimizing the layout. SHT36 is suitable for 36 stepper motors, while SHT42 is suitable for 42 stepper motors. It integrates a CAN transceiver, USB port, TMC2209 driver, ADXL345 accelerometer, two controllable fans, and other functional modules. This toolboard is compatible with Klipper firmware.
Pin Mapping
- This page lists the pin mapping of the FLY-SHT36 tool board after flashing Klipper firmware. The pin numbers are based on the product schematic.
SHT36/42 Firmware Compilation and Flashing
3 items
Tool board ID read and view
- Before searching for the ID, use the XT30 data cable to connect the tool board to the UTOC or a motherboard with bridge firmware flashed; below is the reference wiring diagram.
Motherboard Wiring
Attach the included blue heatsink to the 2209 driver!!!
参考配置
Accelerometer Usage
Usage Tutorial
3D Models and Schematics
* This document provides the following