📄️ Introduction
FLY SHT36 V3 is a nozzle toolboard designed by Guangzhou Meilun Electronics Technology Co., Ltd. for 3D printer extruders. With this toolboard, four wires can replace the complicated wiring between the mainboard and the print head, optimizing the layout. SHT36 V3 is applicable to 36 stepper motors and integrates a CAN transceiver, RS232 transceiver, TypeC port, TMC2209 driver, LIS2DW accelerometer, 2 controllable fans, and other functional components. This toolboard is compatible with Klipper and RRF firmware.
📄️ Onboard DIP Switch Introduction
Due to the high resolution of the images, they cannot be clearly viewed on the web page. Please place the mouse cursor over the wiring diagram, right-click, and select Save Image As to save the image to your desktop for viewing!!!
🗃️ SHT36 V3 firmware compilation and flashing
4 items
📄️ Toolboard ID Reading and Viewing
Please ensure the DIP switch is set to CAN mode*
📄️ Wiring Reference
Due to the high resolution of the image, it is not clear when viewed on the web page. Please place the mouse cursor over the wiring diagram, right-click, and select "Save Image As" to save the image to your desktop for viewing!!
📄️ Configuration Reference
Please do not modify the configuration while web translation is enabled.
📄️ Accelerometer usage
Usage tutorial
📄️ Eddy Usage
* Ensure your printer is not leaking electricity before use
📄️ 3D Model and Schematic
* This document provides the following