Introduction
Product Features
Firmware Flashing
Start Compilation
Motherboard ID Reading and Viewing
* This tutorial is for reading and viewing the ID of the motherboard. For tool boards, please refer to the corresponding product's ID search tutorial.
Pinout
- This page lists the pinout of the FLY-RPFMEX mainboard after flashing Klipper firmware. Pin numbers are based on the mainboard schematic.
参考配置
文档中出现的所有*包裹的内容需要按照自己实际的修改
Flash Bootloader Firmware
Entering Flash Mode
3D Model and Schematic Diagram
* This document provides the following: