Introduction to the Mainboard
Product Features
Raspberry Pi CM4 System Flashing
DIP Switch Introduction
Pro X10 Firmware Compilation and Flashing
3 items
Pinout
- This page lists the pinout of the FLY-Pro X10 mainboard after flashing Klipper firmware. Pin numbers are based on the mainboard schematic.
Read and View Motherboard ID
- This tutorial only covers the methods for reading and viewing the ID of a motherboard.
Connect the CAN Tool Board and Search for ID
This tutorial specifically covers the wiring and ID search for the tool board. The related steps are not applicable* to the mainboard. Please distinguish between them.
Motherboard Wiring
Pin Description
Klipper参考配置
CSI Camera Usage Guide
Mainboard Wiring
Screen Wiring and Configuration
Please first select the screen product you are actually using. Once selected, the page will display the configuration modification method, reference parameters, power-off reminder, and wiring steps for that product.
3D Models and Schematics
* This document provides the following
External Drive Usage Tutorial
Documentation is being edited, please stay tuned.....
Motherboard Precautions
Power Indicator Light
Configure LED
It is necessary to connect to the host computer via SSH and follow the link below for installation and configuration.