Product Introduction
The FLY-C8P does not come with any storage device from the factory (i.e., it does not include an M2WE module or Micro SD card). You must configure at least one of the following storage media for the device to function properly:
FAST System Documentation Center
We have organized the following documentation based on your usage scenarios to help you quickly find what you need.
System Image Flashing
Before downloading and flashing, please confirm that the system image matches your device model.
System Configuration Guide
* This guide will lead you through the basic configuration of the FlyOS-Fast system, helping you get started quickly and optimize your experience.
SSH Connection to Upper Computer
* This document is only applicable to FLY upper computers
Connect WIFI
Screen Wiring and Configuration
Please select the screen product actually in use first. After selection, the page will display the configuration modification method, reference parameters, power-off reminder, and wiring steps for that product.
Fly-C8P Lower Firmware Flashing and ID Query
5 items
Pinout
- This page lists the pinout of the FLY-C8P motherboard after flashing Klipper firmware. Pin numbers are based on the motherboard schematic.
Motherboard Wiring
Interface Description
Klipper参考配置
External Drive Usage Tutorial
Power Loss Shutdown and Power Loss Recovery
1. Function Concepts and Processes
3D Model and Schematic Diagram
* This document provides the following materials
Motherboard Precautions
Power Indicator Light