Firmware Flashing and Onboard DIP Switch Instructions
Selecting the Firmware Type
Firmware Compilation and Flashing
Please first select the firmware type that you actually want to flash. Only after selection will the corresponding compilation and flashing steps be displayed.
Read and View Motherboard ID
- This tutorial is only applicable to reading and viewing the ID of the FLY-C5 motherboard.
Connect to the toolboard and search for ID
This tutorial focuses specifically on the operation and use of the toolboard*. The relevant steps do not apply to the main board; please be aware of this difference.
Bootloader recovery (unbrick)
- Please note that bootloader has already been flashed at the factory, no need to flash it again