Firmware Flashing Instructions
* ERCF is pre-flashed with Katapult firmware for CAN connection at a rate of 1M from the factory.
USB Firmware Flashing
* The Micro4 comes pre-flashed with the Katapult firmware for USB connections, so there is no need to flash it again
CAN firmware flashing
Start compilation.
BL Firmware (Do Not Use)
The FLY-ERCF comes pre-flashed with Katapult from the factory. Do not re-flash the firmware on this page during normal use or when updating the Klipper firmware; this page is only for recovery if the Bootloader is corrupted.