Skip to main content

System Update Log

info
  • If you encounter any problems while using this system, please provide feedback in the after-sales group.

v2

  • 2022-1
  • Changed distribution version to Bullseye
  • Updated kernel to 5.10.85
  • Pre-installed Klipper, Moonraker, Fluidd, Mainsail, KlipperScreen
  • Klipper uses Python3 environment, resolving issues with Chinese filenames
  • Changed boot partition to FAT format, allowing direct configuration file modification in Windows systems
  • Added FLY-Config, a brand new configuration system
  • Added CatSerial, visit http://ip:9999 to directly view all connected serial devices

v2.1

  • Fixed issue where CatSerial would error when no device was connected

v2.2

  • Added BL firmware for Gemini series motherboards. Refer to the documentation for flashing instructions.

v2.4

  • Fixed missing parts of the flashing environment for Klipper
  • Modified configuration templates
  • Added support for mJpg cameras
  • Added pin configuration for V1, V1.1 motherboards. Switch in FLY_Config

v2.9

  • Added support for Gemini v2
  • Improved CAN support
  • Plug-and-play for CAN devices
  • Modified gs_usb kernel module
  • Fixed issue where kernel updates via apt update/apt upgrade caused boot failures

v2.9.3

  • Adapted for FLY-Π
  • Pre-installed kernel source and header files
  • Updated environment
  • Added public key for private APT repository
  • Installed PolicyKit rules for Moonraker
  • Fixed udev rule conflict issues
  • Fixed klipper flash error caused by missing libusb library
  • Fixed issue where FLY-Tools static resources could not be loaded
  • Changed default motherboard model to Gemini v2
  • Changed default serial in printer.cfg to /dev/ttyACM0
  • Changed CAN send buffer size to 1024

v2.9.4

  • Removed pre-installed kernel source and headers (future distribution via deb packages)
  • Fixed issue where RTL88XXau driver could not be mounted

v2.9.5

  • Added WiFi network management for KlipperScreen
  • Fixed other issues

v2.9.6

  • Added support for EMMC and WIFI modules
  • Deprecated mjpg-streamer, replaced with crowsnest
  • Fixed other issues

v2.9.7

  • Fixed issue where KlipperScreen could not start
  • Optimized WIFI driver (eliminated issues like WiFi disconnections, unstable connections, etc.)
  • Optimized file system

v3

  • Added support for FLY-Gemini v3 motherboard
  • Added automatic flashing script based on Gemini v3 motherboard

v3.1

  • Added support for FLY-Pi-V2 motherboard
  • Updated FLY-Tools
  • Default CAN speed set to 1M

v3.1.1

  • Fixed automatic expansion issue

v3.3.3

  • Updated FLY Tools
  • Updated environment
  • Updated FLY-Config, renamed to FlyOS-Env, a brand new configuration system

v3.3.4

  • Optimized file system
  • Added TFT screen rotation
  • Added new shutdown pin setting
  • Updated all system components
  • Added support for modifying system configurations via FLY TOOLS
Loading...
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -
- 3D Mellow -