FLY-Lite2 System Image
tip
- Lite2 and Lite2.1 use the same system
FLY-Lite2 System Download
warning
SD Card Notes:
- Capacity must be no less than
16GB
or no more than128G
TF card - The transfer speed of the TF card must be
class10
or higher. It is recommended to use TF cards from brands like SanDisk.
Notice
- Please download the
FLYOS-FAST
system or theFLYOS-Armbian
system. The original Armbian system is too difficult to use and is not recommended for installation. - Due to server issues, please do not casually update the system or Klipper.
- The
FLYOS-FAST
system does not support updating plugins such asKlipper
.
Important Notice
- Please note that the downloaded system needs to be decompressed, do not simply change the suffix or directly flash it!!!!
- Flashing without decompression will not boot!!!
System Download
- FLYOS-Armbian (based on Armbian)
- FLYOS-FAST
- Original Armbian
tip
- The system comes pre-installed with klipper, moonraker, mainsail, fluidd, klipper-screen, resonance compensation plugin numpy, and FLY-Tools. No need for complex operations such as changing sources. Easier for beginners (requires purchasing a TF card).
- Click on the download link below
-
Loading...
- Standard User
- Root User
Default username: fly
Default password: mellow
Default username: root
Default password: mellow
tip
- FlyOS-Fast is a lightweight Linux system deeply customized for 3D printing, supporting all Fly host platforms.
- FlyOS-Fast is lightweight and boots quickly.
- Click on the download link below
-
Loading...
Default username: root
Default password: mellow
warning
This system is the original Armbian, which does not include any services and requires manual installation.
- Click on the download link below
-
Loading...
Default username: root
Default password: mellow
Loading...