TOOL-LITE
Important Note
- The images are very high resolution and may not be legible in the browser. Right-click on the image, choose "Save image as...", and save it to your desktop for a closer look.
- The images show only the main functions. For more functions, refer to the schematic, or click Pinout in the left sidebar to view the pin functions interactively.
- Functions that are neither shown in the images nor listed in Pinout are not guaranteed to work. Forcing them into use is at your own risk.
Loading...
Mainboard Reference Wiring
Notes
- Below is the reference diagram for dial mode. The mainboard reference wiring diagram is being supplemented.
- Due to the high resolution of the image, it cannot be seen clearly when browsed on the web page. Please place the mouse cursor over the image, right-click, select Save Image As, and save the image to the desktop before viewing!!!
RS232 Instructions
- When RS232 is connected to UTOR or other devices, please note that the IN and OUT of RS232 are cross-connected, that is, IN connects to OUT, and OUT connects to IN, otherwise communication will fail.
- When using RS232 communication, it is necessary to ensure that the ground wires of the tool board and the host computer are connected together, otherwise communication will fail.
Loading...
Loading...