## SHT36 Settings
[mcu sht36]
canbus_uuid: *d085135ff4c2*
## SHT36 Temperature
[temperature_sensor FLY-SHT36]
sensor_type: temperature_mcu
sensor_mcu: sht36
## FAN0
[fan]
pin: sht36:PB10
## FAN1
[heater_fan hotend_fan]
pin: sht36:PB11
heater: extruder
heater_temp: 50.0
## X Endstop Settings
[stepper_x]
endstop_pin: !sht36:PA0
## The SHT board has PA0, PA1, and PA2 endstop pins available. Modify according to your wiring.
## Extruder
[extruder]
step_pin: sht36:PB4
dir_pin: sht36:PB3
enable_pin: !sht36:PA15
microsteps: 16
rotation_distance: 33.5
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: sht36:PA8
sensor_pin: sht36:PB0
sensor_type: ATC Semitec 104GT-2
pullup_resistor: 2200
control: pid
pid_Kp: 22.2
pid_Ki: 1.08
pid_Kd: 114
min_temp: -50
max_temp: 350
## Extruder Driver Settings
[tmc2209 extruder]
uart_pin: sht36:PB5
run_current: 0.600
stealthchop_threshold: 999999
## RGB
[neopixel my_neopixel]
pin: sht36:PB15
chain_count: 12
color_order: GRB
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 0.0
## ADXL345 Accelerometer
[adxl345]
cs_pin: sht36:PA4
spi_bus: spi1
## BLTOUCH
[bltouch]
sensor_pin: ^sht36:PC15
control_pin: sht36:PB1
x_offset: -26.1
y_offset: -15.3
z_offset: 2.1
## PT100 Settings
[temperature_sensor PT100]
sensor_type: MAX31865
sensor_pin: sht36:PA3
spi_bus: spi1
min_temp: -50
max_temp: 350
rtd_reference_r: 430