Skip to main content

Introduction

Fly_WiScreen is a high-end Klipper control screen developed by Guangzhou Meilun Electronic Technology Co., Ltd. (FLY3D). It supports two firmware modes (WIFI/Serial), providing users with flexible connection options: it can connect to a Klipper host via WIFI, or communicate directly with systems like FlyOS-FAST via serial port. The screen responds quickly, features a 7-inch IPS capacitive touch screen, and supports file transfer via USB or TF card, delivering a smooth and efficient operation experience.

Loading...

Core Features​

WIFI Firmware Mode​

  • Network Connection: Supports searching for and connecting to Klipper hosts within the local area network via WIFI.
  • File Transfer: Supports uploading print files to the printer using the onboard USB interface or TF card slot.
  • Cluster Control: Supports master-slave mode, facilitating synchronized management and control of multiple printers.
  • Custom Macros: Supports custom operation macro commands, simplifying debugging and complex operation processes.

Serial Firmware Mode​

  • Direct Connection: Supports direct connection to FlyOS-FAST systems or hosts with the Moon2Uart plugin installed via serial port.
  • Custom Macros: Supports custom operation macro commands, simplifying debugging and complex operation processes.
  • Advanced Features (FlyOS-FAST Exclusive):
    • Power loss recovery prompts and resume.
    • Control and configure the host's WIFI connection via the screen.
    • Set extruder nozzle size and filament type via the screen.
    • File management, model slicing, and print queue setup.
    • View host system version and other information.
  • Notes:
    • Onboard WIFI functionality will be unavailable in this mode.
    • The onboard USB and TF card slots can only be used for firmware updates, not for regular file transfer.

Product Specifications​

  • Processor: Allwinner T113-S3, dual-core Cortex-A7, up to 1.2GHz
  • RAM: Integrated 128MB DDR3
  • Storage: 128MB NAND Flash
  • Display: 7-inch IPS capacitive screen, resolution 1024x600, supports multi-touch
  • External Interfaces: USB 2.0 x1, TF card slot x1
  • Wireless Network: Supports 802.11b/g/n protocol
  • Power Supply: Rated voltage 5V
  • Extended Power Supply: The 5V power port can connect to an external charging module, supporting modification for battery power.

How to Choose Firmware?​

  • If you need to wirelessly connect multiple Klipper printers and transfer files directly via the screen, choose the "WIFI Firmware".
  • If you use the FlyOS-FAST system and want deeply integrated features like power loss recovery and screen-side WiFi configuration, choose the "Serial Firmware".
  • For firmware download and flashing guides, please refer to the subsequent "Firmware Update" chapter.
Loading...