Screen Wiring and Configuration
FLY Host Computer User Guide
tip
Open your IP:9999 in the browser to access FLY-Tools
tip
The HDMI interface on the FLY host computer board is Micro HDMI, please pay attention when purchasing an HDMI cable!!!
tip
The FLY host computer supports FPC one-wire-through for FLY-PI-V2
, FLY-C8
, and FLY-PRO-X10
tip
Using an FPC to HDMI module can be compatible with host computers like Raspberry Pi
- To enable the screen, you need to turn on the option below
- After entering FLY Tools

- HDMI Wiring
- Please ensure the wiring is correct
- FLY-C8 Using LCD FPC One-Wire-Through Wiring
- FLY-Pi-V2 Using LCD FPC One-Wire-Through Wiring
- FLY-PRO-X10 Using LCD FPC One-Wire-Through Wiring
- FLY-Lite2 Using LCD FPC One-Wire-Through Wiring
- Using FPC to HDMI Module
- FLY-C8 HDMI Screen Wiring

- FLY-Pi v2 HDMI Screen Wiring

- FLY-PRO-X10 HDMI Screen Wiring

- FLY-Lite2 HDMI Screen Wiring

- Using FPC to HDMI Module
- Please note that you need to connect the type-c with data transmission function to the module and the corresponding host computer
