Skip to main content

FLY-MINI-Pad Usage Notes

Read before operating

Before performing any wiring operations, be sure to turn off the printer and disconnect the power supply. When flashing firmware, also follow the corresponding guide.

1. Interface Description​

The following figure shows the layout diagram of each interface on the motherboard for quick reference:

Loading...

2. Power Requirements​

  • Type-C power supply: A power adapter with 5V/2A or higher output is required.
  • Terminal power supply: Connect an external 12V-24V DC power supply through the XH-2.54-2P terminal.
    Note

    The host does not support drawing power from the motherboard and must be powered by an independent power supply.

3. Storage Configuration​

Important

The Fly-MINI-Pad does not include a storage device at the factory. A Micro SD (TF) card must be provided by the user to boot the system.

  • Capacity requirement: It is recommended to use a 16GB ~ 128GB Micro SD card.
  • Speed requirement: The memory card speed must be C10 or higher.
Loading...