Screen

Determine screen

Screen configuration

FLYOS-FAST system - Screen configuration

FLYOS-FAST system - Screen configuration

1. Open the device IP address in the browser, for example: http://192.168.6.110/

   fluidd as shown in the figure: uncheck -> filter hidden files and folders.

   mainsail as shown in the figure: check -> show hidden files.

2. At this point, you can see the .flyos-config folder, entering this folder will have the sys-config.conf file.

3. Open the sys-config.conf file, modify the configuration items that need to be modified and then save -> close it.

warning

• Configure resistive screen as: fly-minipad-r, please note that there must be no space after =!
• Configure capacitive screen as: fly-minipad-c, please note that there must be no space after =!
• Configure klipper_screen as: 1, please note that there must be no space after =!
• Note: The format of configuration items in the sys-config.conf file is key=value, do not modify the format on your own!! Otherwise, the configuration will not take effect!!

4. After modifying and saving, reboot the system to take effect.

FLYOS-Armbian system - Screen configuration

FLYOS-Armbian system - Screen configuration

info

• Connect the host computer to WiFi, and after obtaining the host computer's IP, enter IP+:9999 in the browser to access FLY TOOLS and perform screen-related configurations
• For example, if your host computer's IP address is 192.168.6.110, you need to enter 192.168.6.110:9999 in the browser

1. Open FLY TOOLS, follow the steps shown in the figure below, enable Klipper Screen, select the screen model, click the pink button at the bottom right save configuration, and then reboot the host computer to take effect!

warning

• Select resistive screen: fly-tft-v1, make sure the dip switch on the back of the screen is set to Resi

Resistive screen:

Capacitive screen:

2. After saving the configuration, reboot the host computer to take effect!

---