Skip to main content

Host Power Supply Methods

Power Off Before Operation

Before starting, please fully shut down the printer and disconnect the power supply. Do not plug or unplug wiring harnesses, organize interface wiring, or touch terminals while the device is powered on.

Tip

The Fly-MINI-Pad supports the following three power supply methods. Please choose one based on your actual needs.

1. Power Supply via 12V-24V DC Power Source​

  • Please use a dedicated power terminal to connect the DC power source. The recommended voltage is 12V-24V.
  • The power connector model is XH-2.54-2P. Please refer to the diagram below for wiring:
  • Please note: The Fly-MINI-Pad does not support power supply through the motherboard.
    Loading...

2. Power Supply via Type-C Interface​

  • Power can be supplied directly through the Type-C interface. It is recommended to use a power adapter with an output of no less than 5V/2A.
  • The wiring diagram is as follows:
    Loading...

3. Power Supply Using a Battery​

  • The battery connector model is XH-2.54-2P. Please refer to the diagram below for wiring:
  • The battery must be a 3.7V protected lithium battery.
  • The wiring diagram is as follows:
    Loading...
Loading...