🚀 Quick Start
🎯 Goal of this guide: Within 30 minutes, complete the system deployment and firmware flashing for the Fly-MINI-Pad mainboard, bringing it to a state where it can connect to Klipper and perform basic testing.
✅ Completion indicator: Access the Klipper interface via a web page.
📍 Important Notes
- 📦 Required Accessory: Fly-MINI-Pad must be used with a TF card, otherwise the system cannot boot.
- ⚡ Power Requirements: Input voltage range is 5V, do not exceed this range.
- 🔌 Safe Operation: Always disconnect power before performing any wiring operations! When flashing firmware, also follow the guide's instructions.
- 🔧 Tool Preparation: Prepare basic tools such as a screwdriver and data cable in advance.
📦 Step 1: Prepare Tools and Resources
Loading...
📝 Included Content
MobaXterm(for connecting to the host computer)CH340(serial port driver for system connection)Panasonic_SDFormatter(for formatting TF cards)SetupSTM32CubeProgrammer(for flashing the lower computer firmware)
🖥️ Step 2: Install System and Basic Configuration
1. System Image Flashing
2. System Basic Configuration
3. Network and Remote Connection
4. Display Device Configuration
5. Host Computer Power Supply
📝 Notes for this step
- Before flashing the image, ensure the TF card or M2WE is correctly formatted.
- The first system boot may take 3-5 minutes, please be patient.
- For SSH connection, default username: root, password: mellow.
- Screen configuration is only needed if you have a screen device.
📈 Step 3: Extended Features and Advanced Configuration (Optional)
The following features can be configured step by step as needed after completing the basic setup and ensuring the printer can operate normally:
📝 Extended Features and Advanced Configuration
Loading...